浏览全部资源
扫码关注微信
1. 中国科学院大学, 北京 100049
2. 中国科学院长春光学精密机械与物理研究所 应用光学国家重点实验室, 吉林 长春 130033
纸质出版日期:2015-10-10,
收稿日期:2015-7-4,
修回日期:2015-8-17,
扫 描 看 全 文
李贺, 梁静秋, 梁中翥等. AlGaInP-LED发光阵列热场分析及散热设计[J]. 发光学报, 2015,36(10): 1212-1219
Li He, LIANG Jing-qiu, LIANG Zhong-zhu etc. Thermal Field Analysis and Heat Dissipation Design of AlGaInP-based LED Light Emitting Array[J]. Chinese Journal of Luminescence, 2015,36(10): 1212-1219
李贺, 梁静秋, 梁中翥等. AlGaInP-LED发光阵列热场分析及散热设计[J]. 发光学报, 2015,36(10): 1212-1219 DOI: 10.3788/fgxb20153610.1212.
Li He, LIANG Jing-qiu, LIANG Zhong-zhu etc. Thermal Field Analysis and Heat Dissipation Design of AlGaInP-based LED Light Emitting Array[J]. Chinese Journal of Luminescence, 2015,36(10): 1212-1219 DOI: 10.3788/fgxb20153610.1212.
建立了55 AlGaInP材料LED微阵列的有限元热分析模型
根据计算对模型进行了简化。结果表明
简化模型与原始模型的温度分布规律基本一致
计算得到的两种模型在工作1.5 s时的温度相对误差为0.8%。使用简化模型模拟了含10
4
个单元、尺寸为10 mm10 mm100 m的芯片的温度场分布
工作1.5 s时的芯片中心温度已达到360.6 ℃。为解决其散热问题
设计了两种散热器
并对其结构进行了优化
分析了翅片数量、翅片尺寸、粘结材料对芯片温度的影响。
A finite element thermal analysis model of 55 AlGaInP-based LED microarray was established and simplified according to the calculation results. The results show that the simplified model and original model have the same temperature distribution
relative error of simplified model is 0.8% at 1.5 s. Using the simplified model
the temperature distribution of the chip with the size of 10 mm10 mm100 m and 10
4
units was calculated
and the center temperature of chip reached 360.6 ℃ at 1.5 s. In order to solve the problem of heat dissipation
two finned radiators were designed
and the impacts of radiator structure
adhesive material
and number of fins on the temperature of chip were simulated.
光学器件热学特性有限元分析LED微阵列散热器
optical devicesthermal characteristicfinite element analysisLED microarrayradiator
Liang J Q. Research advances in micro-LED display devices [J]. OME Information (光机电信息), 2010, 27(12):21-27 (in Chinese).
Li K H, Cheung Y F. Optical and thermal analyses of thin-film hexagonal micro-mesh light-emitting diodes [J]. IEEE Phton. Technol. Lett., 2013, 25(4):374-377.
Kim M S, Lee H K, Yu J S. Device characteristics and thermal analysis of AlGaInP-based red monolithic light-emitting diode arrays [J]. Semicond. Sci. Technol., 2013, 28(2):025005-1-8.
Cho J Y, Byeon K J. Improved AlGaInP vertical emittinglight-emitting diodesusingdirect printing [J]. Opt. Lett., 2013, 38(9):1573-1575.
Pan J W, Tsai P J. Light extraction efficiency analysis of GaN-based light-emitting diodes with nanopatterned sapphire substrates [J]. Appl. Opt., 2013, 52(7):1358-1367.
Dai Q, Shan Q F, Wang J, et al. Carrier recombination mechanisms and efficiency droop in GaInN/GaN light-emitting diodes [J]. Appl. Phys. Lett., 2010, 97(13):133507-1-3.
Guo L X, Zuo D W, Sun Y L, et al. Heat dissipation technology of LED and its rsearch process [J]. China Illumin. Eng. J.(照明工程学报), 2013, 24(4): 64-70 (in Chinese).
Shabany Y. Heat Transfer: Thermal Management of Electronics [M]. Beijing: China Machine Press, 2013:135-158 (in Chinese).
Liang J Q, Li J, Wang W B, et al. Design and fabrication of AlGaInP LED array [J]. Chin. J. Liq. Cryst. Disp.(液晶与显示), 2006, 21(6):604-608 (in Chinese).
Tian C, Liang J Q, Liang Z Z, et al. Design and experiment AlGaInP micro-LED arrays with double strip electrode [J]. Chin. J. Lumin.(发光学报), 2013, 34(11):840-845 (in Chinese).
Bao X Z, Liang J Q, Liang Z Z, et al. Effect of AlGaInP-LED arrays units side-reflection on light output efficiency [J]. Chin. J. Liq. Cryst. Disp.(液晶与显示), 2013, 28(5):726-731 (in Chinese).
Dai W F. Transient thermal analysis of high power LED package [J]. Semicond. Optoelectron.(半导体光电), 2008, 29 (3):324-328 (in Chinese).
Hu L M, Li Z J, Qin L, et al. Thermal analysis of high-power, high-duty-cycle laser diode array [J]. Acta Optica Sinica (光学学报), 2010, 30(4):1055-1060 (in Chinese).
Zhang J W, Ning Y Q, Zhang X, et al. Analysis of the thermal model based on the carrier injection mechanisms within the semiconductor laser [J]. Chin. J. Laser.(中国激光), 2012, 39(10):1002003-1-6 (in Chinese).
Zhang J F, Wang C L, Wu Y P, et al. Application of ANSYS in heat-analysis [J]. Energy Metallurg. Ind., 2004, 23(5):9-12.
Zhou C Y. Study on LabVIEW-based Measurement of Junction Temperature of LED and Its Photoelectric Properties[D]. Qingdao: Ocean University of China, 2011:61-62 (in Chinese).
Liu X. Reliability Research of LED Road Lamp Design Technology[D]. Shenyang: Shenyang Ligong University, 2012:36-66 (in Chinese).
0
浏览量
51
下载量
1
CSCD
关联资源
相关文章
相关作者
相关机构