浏览全部资源
扫码关注微信
江苏大学 汽车与交通工程学院,江苏 镇江,212013
纸质出版日期:2015-10-10,
收稿日期:2015-6-15,
修回日期:2015-7-21,
扫 描 看 全 文
李小华, 包伟伟, 王静等. 基于电晕放电的大功率LED散热研究[J]. 发光学报, 2015,36(10): 1195-1200
LI Xiao-hua, BAO Wei-wei, WANG Jing etc. High Power LED Heat Dissipation Based on Corona Discharge[J]. Chinese Journal of Luminescence, 2015,36(10): 1195-1200
李小华, 包伟伟, 王静等. 基于电晕放电的大功率LED散热研究[J]. 发光学报, 2015,36(10): 1195-1200 DOI: 10.3788/fgxb20153610.1195.
LI Xiao-hua, BAO Wei-wei, WANG Jing etc. High Power LED Heat Dissipation Based on Corona Discharge[J]. Chinese Journal of Luminescence, 2015,36(10): 1195-1200 DOI: 10.3788/fgxb20153610.1195.
针对大功率LED芯片的散热问题
提出了一种基于电晕放电原理的离子风散热方案。通过试验
研究了电晕放电的电学性能
同时探寻了放电电压对制冷效果的影响以及温降随电晕放电功率的变化规律。结果表明
放电间距相同时
对发生器施加负电晕能够在较低的电压下产生离子风
降温效果显著。电晕电流平方根与放电电压呈线性关系。电晕放电功率为1.5 W、放电间距为10 mm时
散热效果最好。
An ionic wind cooling method based on corona discharge theory was presented to meet the thermal demand of high power LED. The electrical properties of corona discharge were studied through experimental measurement. The effect of discharge voltage on the refrigerating performance was researched
as well as the change laws of temperature drops with discharge power. The experimental results indicate that the negative corona can generate ionic wind at lower voltage and result in siganificant cooling at the same electrode gap comparing with positive corona.The corona current square root displays a good linear relationship to the applied voltage.The optimal refrigerating performance is attained at 1.5 W power and 10 mm electrode gap.
大功率LED电晕放电离子风针-网电极强化传热
high power LEDcorona dischargeionic windneedle-mesh electrodesforced heat transfer
Zhou Q C, Bai Z L, Lu L, et al. Remote phosphor technology for white LED applications: Advances and prospects [J]. Chin. Opt.(中国光学), 2015, 8(3):313-328 (in Chinese).
Hu C Q, Zhang F H, Zhang J. Spectral and junction temperature properties of white light LED [J]. Chin. J. Lumin.(发光学报), 2012, 33(9):939-943 (in Chinese).
Zhou Z, Feng S W, Zhang G C, et al. The aging characteristics of high-power GaN-based white light-emitting diodes [J]. Chin. J. Lumin.(发光学报), 2011, 32(10):1046-1050 (in Chinese).
Zhao X J, Cai Y X, Wang J, et al. Thermal model design and optimize of LED headlamp cooling device based on semiconductor refrigeration [J]. Chin. J. Lumin.(发光学报), 2014, 35(10):1269-1275 (in Chinese).
Wang J, Zhao X J, Cai Y X, et al. Experimental study on the thermal management of high-power LED headlight cooling device integrated with thermoelectric cooler package [J]. Energy Conv. Manag., 2015, 101:532-540.
Wan Z M, Chen M, Liu W, et al. Research on porous micro heat sink for thermal management of high power LED [J]. J. Mechan. Eng.(机械工程学报), 2010, 46(8):109-113 (in Chinese).
Luo X B, Liu S, Jiang X P, et al. Numerical and experimental investigation on thermal solution of micro cooling system for high power LED [J]. Sci. China Ser. E: Technol. Sci.(中国科学E辑), 2007, 37(9):1194-1204 (in Chinese).
Kim L, Choi Z H, Jang S H, et al. Thermal analysis of LED array system with heat pipe [J]. Thermochim. Acta, 2007, 455:21-25.
Chen I Y, Chen C J, Wang C C. Influence of electrode configuretion on the heat transfer performance of a LED heat source [J]. Int. J. Heat Mass Transfer, 2014, 77:795-801.
Sheu W J, Hsiao J J, Wang C C. Effect of oscillatory EHD on the heat transfer performance of a flat plate [J]. Int. J. Heat Mass Transfer, 2013, 76:419-424.
Xu X J, Chu D C. Gas Discharge Physics [M]. Shanghai: Fudan University Press, 1996:248-267 (in Chinese).
Luo T Q. Fluid Mechanics [M]. 3rd ed. Beijing: China Machine Press, 2007:158-164 (in Chinese).
Allen P H G, Karayiannis T G. Electrohydrodynamic enhancement of heat transfer and fluid flow [J]. Heat Recovery Systems & CHP, 1995, 15(5):389-423.
Sadek H, Robinson A J, Cotton J S, et al. Electrohydrodynamic enhancement of in-tube convective condensation heat transfer [J]. Int. J. Heat Mass Transfer, 2006, 49:1647-1657.
Li R Y, Chen L B, Chen Z H, et al. Mechanism analysis on EHD enhancement of heat transfer [J]. J. East China Univ. Technol.(华东工业大学学报), 1996, 18(4):5-12 (in Chinese).
Ren C Y, Wang J, Yan P, et al. Experimental analysis of corona discharges and sound characteristics of needle-plane electrodes under DC voltage [J]. High Volt. Eng.(高电压技术), 2013, 39(1):226-233 (in Chinese).
Force T. Measurement of audible noise from transmission lines [J]. IEEE Trans. Power Apparat. Syst., 1981, 100(3):1440-1452.
Lekganyane M J, Ijumba N M, Britten A C. Corona audible noise measurements in a small indoor corona cage under HVDC voltage[C]//International Conference on Power System Technology, Chongqing: IEEE, 2006:1-5.
Chen S X, Xie G R. The effect of temperature on the corona performances [J]. High Volt. Eng.(高电压技术), 1994, 20(3):3-7 (in Chinese).
Liang X D, Chen C Y, Zhou Y X. High Voltage Engineering [M]. Beijing: Tsinghua University Press, 2003:23-26 (in Chinese).
Otmar M S. Ion drag pressure generation [J]. J. Appl. Phys., 1959, 30(7):984-994.
Mitchell A S, Williams L E. Heat transfer by the corona wind impinging on a flat surface [J]. J. Electrostat., 1978, 1(5):309-324.
Owsenek B L, Seyed-Yagoobi J, Page R H. Experimental investigation of corona wind heat transfer enhancement with a heated horizonal flat plate [J]. J. Heat Transfer, 1995, 117(2):309-315.
0
浏览量
57
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构