浏览全部资源
扫码关注微信
1. 天津理工大学显示材料与光电器件教育部重点实验室 天津,300384
2. 天津大学化工学院 天津,300072
3. 中国电子科技集团第18 研究所 天津,300384
4. 天津理工大学材料科学与工程学院天津市光电显示材料与器件重点实验室 天津,300384
纸质出版日期:2017-9-5,
网络出版日期:2017-6-22,
收稿日期:2017-2-27,
修回日期:2017-4-22,
扫 描 看 全 文
妙亚, 董素娟, 刘少伟等. 在电子传输层中添加PVK提高钙钛矿太阳能电池的性能[J]. 发光学报, 2017,38(9): 1210-1216
MIAO Ya, DONG Su-juan, LIU Shao-wei etc. Improving The Performance of Inverted Planar Heterojunction Perovskite Solar Cells <em>via</em> Poly(n-vinylcarbazole) as Additive in Electron Transporting Layer[J]. Chinese Journal of Luminescence, 2017,38(9): 1210-1216
妙亚, 董素娟, 刘少伟等. 在电子传输层中添加PVK提高钙钛矿太阳能电池的性能[J]. 发光学报, 2017,38(9): 1210-1216 DOI: 10.3788/fgxb20173809.1210.
MIAO Ya, DONG Su-juan, LIU Shao-wei etc. Improving The Performance of Inverted Planar Heterojunction Perovskite Solar Cells <em>via</em> Poly(n-vinylcarbazole) as Additive in Electron Transporting Layer[J]. Chinese Journal of Luminescence, 2017,38(9): 1210-1216 DOI: 10.3788/fgxb20173809.1210.
为了探究PVK对倒置平面异质结钙钛矿太阳能电池电子传输层的影响,向电子传输层PCBM中添加了一种富电子的聚乙烯基咔唑(PVK)。采用原子力显微镜、PL光谱对薄膜进行了表征。实验结果表明:少量PVK的添加提高了覆盖在钙钛矿薄膜上PCBM层的平整度。当PVK的添加质量分数为4%时得到最佳器件效率,相比于纯PCBM作为电子传输层的器件,器件效率由(5.110.14)%提升到(9.080.46)%。当PVK的添加质量分数大于4%时,粗糙度又趋于变大。PL光谱显示,少量PVK的加入使钙钛矿/电子传输层薄膜的PL强度降低,并使PL峰蓝移。研究表明:向PCBM中掺杂适量PVK能够改善钙钛矿/电子传输层/Al的界面接触,减少漏电流,并能够减少钙钛矿表面陷阱和晶界缺陷,减少电荷复合,从而提高了器件性能。
An electron-rich poly(n-vinylcarbazole) (PVK) was applied to dope the[6
6]-phenyl-C
61
-butyric acid methyl ester (PCBM) to explore the influence of PVK on the electron transfer layer of planar heterojunction perovskite solar cells. Under the optimized PVK doping mass fraction of 4%
the power conversion efficiency (PCE) of the CH
3
NH
3
PbI
3
perovskite solar cells is enhanced from (5.110.14)% to (9.080.46)%. According to the surface morphology study of the electron transport layer
PVK doping improves the coverage and quality of PCBM layer onto the rough perovskite layer
and this is beneficial for the interfacial contact of the CH
3
NH
3
PbI
3
PCBM films and the top Al electrode
which results in the decrease of leakage current. Moreover steady-state PL analysis shows that the electron-rich PVK have a better passivation effect on the trap states at the perovskite surface or crystal boundaries as a material of interfacial modification of cathodes
thus can apparently decrease the charge recombination of the perovskite solar cells.
钙钛矿掺杂界面工程聚乙烯基咔唑缺陷
perovskite solar cellsdopingnterface engineeringpoly(n-vinylcarbazoletrap states
LEE M M, TEUSCHER J, MIYASAKA T, et al.. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites[J]. Science, 2012, 338(6107):643-647.
GIORGI G, FUJISAWA J I, SEGAWA H, et al.. Small photocarrier effective masses featuring ambipolar transport in methylammonium lead iodide perovskite:a density functional analysis[J]. J. Phys. Chem. Lett., 2013, 4(24):4213-4216.
EPERON G E, STRANKS S D, MENELAOU C, et al.. Formamidinium lead trihalide:a broadly tunable perovskite for efficient planar heterojunction solar cells[J]. Energy Environ. Sci., 2014, 7(3):982-988.
STRANKS S D, EPERON G E, GRANCINI G, et al.. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber[J]. Science, 2013, 342(6156):341-344.
YIN W J, SHI T T, YAN Y F. Unique properties of halide perovskites as possible origins of the superior solar cell performance[J]. Adv. Mater., 2014, 26(27):4653-4658.
KOJIMA A, TESHIMA K, SHIRAI Y, et al.. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells[J]. J. Am. Chem. Soc., 2009, 131(17):6050-6051.
YU J C, KIM D B, BAEK G, et al.. High-performance planar perovskite optoelectronic devices:a morphological and interfacial control by polar solvent treatment[J]. Adv. Mater., 2015, 27(23):3492-3500.
ZHAO Y X, ZHU K. Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications[J]. Chem. Soc. Rev., 2016, 45(3):655-689.
LI X, BI D Q, YI C Y, et al.. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells[J]. Science, 2016, 353(6294):58-62.
BI D Q, TRESS W, DAR M I, et al.. Efficient luminescent solar cells based on tailored mixed-cation perovskites[J]. Sci. Adv., 2016, 2(1):e1501170-1-7.
SALIBA M, MATSUI T, SEO J Y, et al.. Cesium-containing triple cation perovskite solar cells:improved stability, reproducibility and high efficiency[J]. Energy Environ. Sci., 2016, 9(6):1989-1997.
WANG Q, SHAO Y C, DONG Q F, et al.. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process[J]. Energy Environ. Sci., 2014, 7(7):2359-2365.
XU J X, BUIN A, IP A H, et al.. Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes[J]. Nat. Commun., 2015, 6:7081-1-8.
SHAO Y C, YUAN Y B, HUANG J S. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells[J]. Nat. Energy, 2016, 1:15001-1-6.
李建丰, 赵创, 张恒, 等. 利用PVP添加剂提高钙钛矿太阳能电池光伏性能[J]. 发光学报,2016, 37(1):56-62. LI J F, ZHAO C, ZHANG H, et al.. Enhancement of the photovoltaic performance of CH3NH3PbI3 perovskite solar cells by using polyvinylpyrrolidone additive[J]. Chin. J. Lumin., 2016, 37(1):56-62. (in English)
ZHANG K C, YU H, LIU X D, et al.. Fullerenes and derivatives as electron transport materials in perovskite solar cells[J]. Sci. China Chem., 2017, 60(1):144-150.
LIU X D, JIAO W X, LEI M, et al.. Crown-ether functionalized fullerene as a solution-processable cathode buffer layer for high performance perovskite and polymer solar cells[J]. J. Mater. Chem. A, 2015, 3(17):9278-9284.
BAI Y, YU H, ZHU Z L, et al.. High performance inverted structure perovskite solar cells based on a PCBM:polystyrene blend electron transport layer[J]. J. Mater. Chem. A, 2015, 3(17):9098-9102.
ZHU Z L, XUE Q F, HE H X, et al.. A PCBM electron transport layer containing small amounts of dual polymer additives that enables enhanced perovskite solar cell performance[J]. Adv. Sci., 2016, 3(9):1500353-1-7.
DONG S J, WAN Y Y, WANG Y L, et al.. Polyethylenimine as a dual functional additive for electron transporting layer in efficient solution processed planar heterojunction perovskite solar cells[J]. RSC Adv., 2016, 6(63):57793-57798.
ETGAR L, GAO P, XUE Z S, et al.. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells[J]. J. Am. Chem. Soc., 2012, 134(42):17396-17399.
SHAO Y C, XIAO Z G, BI C, et al.. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells[J]. Nat. Commun., 2014, 5:5784-1-7.
0
浏览量
104
下载量
1
CSCD
关联资源
相关文章
相关作者
相关机构