紫外光LED固化面光源光学系统设计

向昌明; 文尚胜; 陈颖聪; 史晨阳

doi:10.3788/fgxb20163712.1507

您当前的位置：

首页 >

文章列表页 >

紫外光LED固化面光源光学系统设计

器件制备及器件物理 | 更新时间：2020-08-12

- 紫外光LED固化面光源光学系统设计
- Optical System Design of LED Area Source for Ultraviolet Curing
- 发光学报 2016年37卷第12期页码：1507-1513
- 作者机构：
  
  1. 华南理工大学材料科学与工程学院, 广东广州 510640
  2. 华南理工大学发光材料与器件国家重点实验室, 广东广州 510640
- 作者简介：
- 基金信息：
  
  国家文化科技提升计划（GJWHKJTSXM20154464）();广东省应用型科技研发专项（2015B010134001）();广东省扬帆计划引进创新创业团队专项（20
- DOI：10.3788/fgxb20163712.1507
  中图分类号： O439
- 纸质出版日期：2016-12-10，
  
  收稿日期：2016-6-25，
  
  修回日期：2016-8-24，
扫描看全文
向昌明, 文尚胜, 陈颖聪等. 紫外光LED固化面光源光学系统设计[J]. 发光学报, 2016,37(12): 1507-1513

XIANG Chang-ming, WEN Shang-sheng, CHEN Ying-cong etc. Optical System Design of LED Area Source for Ultraviolet Curing[J]. Chinese Journal of Luminescence, 2016,37(12): 1507-1513
向昌明, 文尚胜, 陈颖聪等. 紫外光LED固化面光源光学系统设计[J]. 发光学报, 2016,37(12): 1507-1513 DOI： 10.3788/fgxb20163712.1507.

XIANG Chang-ming, WEN Shang-sheng, CHEN Ying-cong etc. Optical System Design of LED Area Source for Ultraviolet Curing[J]. Chinese Journal of Luminescence, 2016,37(12): 1507-1513 DOI： 10.3788/fgxb20163712.1507.

摘要

为解决紫外光LED固化面光源光斑均匀性差及辐照强度低的问题，提出一种阵列式紫外光LED固化面光源光学系统的设计方法。基于几何光学及菲涅耳定律等相关理论，完成近朗伯光型LED透镜自由曲面轮廓线的推导，结合理论公式计算出透镜阵列排布时透镜之间的最佳间距。结果表明：透镜有效控制了光线的发散，提高了阵列面光源所产生光斑的辐照强度及照度均匀度，使阵列结构更加紧凑。当光源半值角分别为27.5和15.5时，照度均匀度分别为95.3%和98.6%，辐照强度分别是理想朗伯型光源阵列的2.5倍和6.4倍。进一步分析了工作距离和芯片形状及其尺寸对面光源光学系统的影响，并通过实验对模拟结果进行验证，为紫外发光二极管的应用及光学系统设计提供了一定的理论依据。

Abstract

In order to enhance the uniformity and irradiation intensity of UV-LED area curing

an optical system for array UV-LED curing area-focusing was constructed. Based on the geometrical optics and Fresnel's law

the derivation of lens contour was completed

and the optimum resolution of lens array was calculated. The results show that the light is controlled effectively by lens

the irradiance intensity and irradiance uniformity of area-focusing are improved

while the structure of array is more compact. When the half value of the light source is 27.5 and 15.5

the uniformity is 95.3% and 98.6%

and the irradiance intensity is 2.5 and 6.4 times larger than Lambertian optical source array. The influence of working distance and the parameters of chip on area-focusing optical source system is also analyzed

and the simulation results are verified by experiments. These results provide theoretical basis for the application of UV-LED and optical design.

关键词

光学设计自由曲面近朗伯光源紫外固化阵列

Keywords

optical designfreeform surfaceapproximate Lambertian sourceultraviolet curingarray

references

谢军,游立德,侯文杰. 光固化快速成形中的紫外LED光源系统实验研究[J]. 光电工程, 2009, 36(2):100-104. XIE J, YOU L D, HOU W J. Experimental research of ultraviolet LED source system in stereolithography apparatus[J]. Opto-Electron. Eng., 2009, 36(2):100-104. (in Chinese)

PELKA D G, PATEL K. An overview of LED applications for general illumination[J]. SPIE, 2003, 5186:15-26.

SCHUBERT E F. Light-emitting Diode[M]. Cambridge:Cambridge University Press, 2006.

BILL C. 紫外LED固化技术进展[J]. 涂料与油墨(中国版), 2014(7):28. BILL C. Progress of UV curing technology[J]. Coat. Ink (China), 2014(7):28. (in Chinese)

芦永军,许文海,曲艳玲,等. 365 nm紫外LED二维空间阵列光学系统设计[J]. 光子学报, 2009, 38(2):268-271. LU Y J, XU W H, QU Y L, et al.. Optical system design of two-dimensional array of 365 nm UV LED[J]. Acta Photon. Sinica, 2009, 38(2):268-271. (in Chinese)

芦永军,许文海,赵欢,等. 二维空间紫外LED阵列实现单光斑辐照度固化系统的设计[J]. 应用光学, 2009, 30(1):16-19. LU Y J, XU W H, ZHAO H, et al.. Design a single spot UV-curing system with two-dimensional UV-LED array[J]. J. Appl. Opt., 2009, 30(1):16-19. (in Chinese)

许文海,赵欢,芦永军,等. LED阵列式紫外固化光源光学系统设计[J]. 光学精密工程, 2007, 15(7):1032-1037. XU W H, ZHAO H, LU Y J, et al.. Design of an optical system for UV curing source with LED array[J]. Opt. Precision Eng., 2007, 15(7):1032-1037. (in Chinese)

孟祥翔,刘伟奇,冯睿,等. 双自由曲面LED均匀照明准直透镜设计[J]. 光子学报, 2014, 43(8):0822003-1-6. MENG X X, LIU W Q, FENG R, et al.. Design of LED collimator for uniform illumination with double freeform surface[J]. Acta Photon. Sinica, 2014, 43(8):0822003-1-6. (in Chinese)

杨凯,李晓艳,林斌,等. 基于自由曲面透镜的LED路灯配光优化设计[J]. 光子学报, 2015, 44(7):0722001-1-6. YANG K, LI X Y, LIN B, et al.. Light distribution optimization design of LED street light based on freeform surface lens[J]. Acta Photon. Sinica, 2015, 44(7):0722001-1-6. (in Chinese)

WANG T Y, CHEN J J, HUANG K L, et al.. Freeform lens design using a complementary optimization method for uniform illumination with extended LED light sources[J]. SPIE, 2014, 9272:927214.

陈颖聪,文尚胜,罗婉霞,等. 自由曲面底板的LED光学设计[J]. 红外与激光工程, 2014, 43(9):2947-2953. CHEN Y C, WEN S S, LUO W X, et al.. Design of LED optical system based on the substrate with freeform surface[J]. Infrared Laser Eng., 2014, 43(9):2947-2953. (in Chinese)

秦华,冯东太,刘波,等. 用粒子群算法设计非球面准直透镜的方法[J]. 红外与激光工程, 2015, 44(6):1811-1817. QIN H, FENG D T, LIU B, et al.. Design method of collimating aspheric lenses based on PSO algorithm[J]. Infrared Laser Eng., 2015, 44(6):1811-1817. (in Chinese)

王加文,苏宙平,袁志军,等. LED阵列模组化中的照度均匀性问题[J]. 光子学报, 2014, 43(8):0822004-1-7. WANG J W, SU Z P, YUAN Z J, et al.. Study on uniformity of LED array illumination distribution on target plane[J]. Acta Photon. Sinica, 2014, 43(8):0822004-1-7. (in Chinese)

郝剑,荆雷,王尧,等. 阵列型紫外LED匀光照明系统设计[J]. 光学学报, 2015, 35(10):1022003-1-7. HAO J, JING L, WANG Y, et al.. Design of uniform illumination for array LED[J]. Acta Opt. Sinica, 2015, 35(10):1022003-1-7. (in Chinese)

史晨阳,文尚胜,陈颖聪. 基于Taguchi方法的曲面LED阵列照度问题研究[J]. 发光学报, 2015, 36(3):348-354. SHI C Y, WEN S S, CEHN Y C. Study on curved surface LED array illumination problem based on Taguchi method[J]. Chin. J. Lumin., 2015, 36(3):348-354. (in Chinese)

WU R M, ZHENG Z R, LI H F, et al.. Optimization design of irradiance array for LED uniform rectangular illumination[J]. Appl. Opt., 2012, 51(13):2257-2263.

MORENO I, TZONCHEV R I. Effects on illumination uniformity due dilution on arrays of LEDs[J]. SPIE, 2004, 5529:268-275.

张航,梁雪,严金华,等. LED准直器设计中复合抛物面同步多曲面方法[J]. 光学学报, 2012, 32(9):0922004-1-6. ZHANG H, LIANG X, YAN J H, et al.. Compound parabolic concentrator-simultaneors multiple surfaces design methods for LED collimators[J]. Acta Opt. Sinica, 2012, 32(9):0922004-1-6. (in Chinese)

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

具有曲面反射面的高均匀度LED植物光源

具有凸台结构的高照明均匀度倒置型植物光源设计

高照明均匀度倒置型LED植物光源系统的设计

光量子体系下基于粒子群算法的LED植物照明光源设计

直下式LED黄疸灯的设计与制作