浏览全部资源
扫码关注微信
1. 北京航空航天大学仪器科学与光电工程学院 北京,100191
2. 湖北三江航天红峰控制有限公司,湖北 孝感,432000
3. 山东电力设备有限公司,山东 济南,250000
纸质出版日期:2015-9-3,
收稿日期:2015-4-27,
修回日期:2015-7-22,
扫 描 看 全 文
高洋洋, 王夏霄, 周卫宁等. 光纤陀螺用超辐射发光二极管启动模型研究[J]. 发光学报, 2015,36(9): 1076-1081
GAO Yang-yang, WANG Xia-xiao, ZHOU Wei-ning etc. Start-up Model of Superluminescent Light Emitting Diodes Used in Fiber Optic Gyroscope[J]. Chinese Journal of Luminescence, 2015,36(9): 1076-1081
高洋洋, 王夏霄, 周卫宁等. 光纤陀螺用超辐射发光二极管启动模型研究[J]. 发光学报, 2015,36(9): 1076-1081 DOI: 10.3788/fgxb20153609.1076.
GAO Yang-yang, WANG Xia-xiao, ZHOU Wei-ning etc. Start-up Model of Superluminescent Light Emitting Diodes Used in Fiber Optic Gyroscope[J]. Chinese Journal of Luminescence, 2015,36(9): 1076-1081 DOI: 10.3788/fgxb20153609.1076.
为了实现光纤陀螺的快启动
从超辐射发光二极管(SLD)发光机理出发
通过分析光源的驱动电流和管芯温度在上电后的变化规律
建立了SLD的启动模型
找出了影响SLD启动时间的因素。用高速数据采集卡测得SLD的常温启动时间约为3~4s
由温控系统系统引起的功率波动误差为4.5%
波长的漂移量为0.92nm。实验测试结果与建立的理论模型相符
从理论上提出了缩短SLD启动时间和实现陀螺快启动的方法。
In order to realize the quick start-up of fiber optic gyroscope
the start-up model of the superluminescent light emitting diodes (SLD) was established by analyzing the change principle of drive current and temperature in SLD after power on
and the factors affecting the start-up time of SLD were got. By using high-speed data acquisition card
the start-up time of SLD was measured to be 3-4 s at room temperature
the power fluctuation error was 4.5%
and the wavelength drift was 0.92nm caused by the temperature control system. The experiment results were consistent with the theoretical model established. The methods to reduce the start-up time of SLD and realize the quick start-up of fiber optic gyroscope were proposed in theoretically.
启动模型SLD温度输出功率波长
start-up modelSLDtemperatureoutput powerwavelength
Lloyd S W, Fan S H. Experimental observation of low noise and low drift in a laser-driven fiber optic gyroscope [J]. Lightwave Technol., 2013, 31(13):2079-2085.
Li C H, Wang W, Zhang J J. FOG quick start-up at low temperature [J]. J. Chin. Inert. Technol.(中国惯性技术学报), 2007, 15(2):237-240 (in Chinese).
Chang J X, Qin B K, Chen S F. Study on the setup time of interferometric fiber optic gyroscope [J]. SPIE, 2000, 4077:44-47.
Burns W K, Chen C, Moeller R P. Fiber-optic gyroscopes with broad-band sources [J]. Lightwave Technol., 1983, 1(1):98-105.
Romain B, Khalid M, Vincent A, et al. Enhanced spectrum superluminescent diodes fabricated by infrared laser rapid thermal annealing [J]. Opt. Laser Technol., 2013, 54:401-406.
Zhou Y, Duan L H, Zhang J, et al. 1 310 nm polarization-insensitive high power superluminescent diodes fabricated by liquid phase epitaxy [J]. Chin. J. Lumin.(发光学报), 2015, 36(1):69-74 (in Chinese).
Zhang W X. Fiber Optic Gyro and Its Application [M]. Beijing: National Defence Industry Press, 2008 (in Chinese).
Wang G F, He A Z, Li Z H, et al. SLD effect on the performance of fiber optic gyro [J]. Transduc. Microsyst. Technol.(传感器与微系统), 2006, 25(6):28-33 (in Chinese).
Sidney L A C. Drift caused by phase modulator non-linearities in fiber gyroscopes [J]. SPIE, 1990, 1267:187-191.
Celikel O, San S E. Design details and characterization of all digital closed-loop interferometric fiber optic gyroscope with superluminescent light emitting diode [J]. Opt. Rev., 2009, 16(1):35-43.
Niloy K D, Peter P D. Optical properties of a GaAlAs superluminescent diode [J]. IEEE J. Quant. Electron., 1983, 19(4):496-498.
Yin J L, Liu J, Yu W T. Temperature control characteristics of superluminescent diode for IFOG [J]. Semicond. Optoelectron.(半导体光电), 2010, 31(5):817-820 (in Chinese).
Tan F L, Fok S C. Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design [J]. Energy Convers. Manag., 2008, 49:1715-1723.
Li J L, Shi Y B, Zhao P F, et al. High precision thermostat system with TEC for laser diode [J]. Infrared Laser Eng.(红外与激光工程), 2014, 43(6):1746-1749 (in Chinese).
0
浏览量
72
下载量
3
CSCD
关联资源
相关文章
相关作者
相关机构