浏览全部资源
扫码关注微信
闽南师范大学 物理与信息工程学院,福建 漳州,363000
[ "周锦荣 (1974-),男,福建漳州人,讲师,2006年于同济大学获得硕士学位,主要从事光电控制与信息处理方面的研究. E-mail: jinrongzhou@163.com" ]
纸质出版日期:2015-8-3,
收稿日期:2015-4-27,
修回日期:2015-6-25,
扫 描 看 全 文
周锦荣,. 白光LED智能调光数学模型[J]. 发光学报, 2015,36(8): 953-956
ZHOU Jin-rong,. Intelligent Dimmer Mathematical Model of White Light LED[J]. Chinese Journal of Luminescence, 2015,36(8): 953-956
周锦荣,. 白光LED智能调光数学模型[J]. 发光学报, 2015,36(8): 953-956 DOI: 10.3788/fgxb20153608.0953.
ZHOU Jin-rong,. Intelligent Dimmer Mathematical Model of White Light LED[J]. Chinese Journal of Luminescence, 2015,36(8): 953-956 DOI: 10.3788/fgxb20153608.0953.
LED灯的光通量不仅受电流的影响
还受到结温变化的影响.针对传统LED调光存在只改变电流大小而忽略结温变化对光通量影响所存在的不足
结合LED结温和管脚温度存在特定的关系
利用实验装置采集HL001WY型GaN基白光LED在不同管脚温度和正向电流下的光通量实验数据并进行二次项趋势回归
利用定标和归一化方法建立光通量、电流以及管脚温度三者变化关系的数学模型.计算结果表明
利用该方法建立的模型得到的计算数值与实验实际测量值的相对误差小于4.5%.
LED light flux is affected not only by current
but also by the junction temperature change. The traditional LED dimming method typically only changes the current and ignores the junction temperature changes. In order to fix this downside
a mathematical model was established based on the relationship among the luminous flux
current and pin temperature that can show the junction temperature of LED. The luminous fluxes of HL001WY type GaN-based white LEDs were tested at different currents and pin temperatures
and the experimental data were quadratic term trend regression. By using calibration and normalization method
the mathematical model was established. The calculations show that the relative error between the calculated value and the actual measured value is less than 4.5%.
智能调光模型分析电光转换热分析
smart dimmingmodel analysiselectro-optical conversionthermal analysis
Wang L, Wang X D, Huang G Y, et al. Research and design of the tunnel lighting dimming system based on LED light source [J]. Proc. Autom. Instrum.(自动化仪表), 2012, 33(12):54-57 (in Chinese).
Fan H P, Li J L, Liu Z D. Plant intelligent LED dimmer system design based on WSN [J]. J. Agric. Mechan. Res.(农机化研究), 2013(12):178-181 (in Chinese).
Zhao Q M, Zhou X L, Zhou M Q, et al. Research on the effect of LED lighting system for supplementary lighting on the arabidopsis seed germination [J]. China Illumin. Eng. J.(照明工程学报), 2012, 23(3):64-68 (in Chinese).
Loo K H, Lai Y M, Tan S C, et al. On the color stability of phosphor-converted white LEDs at DC, PWM, and bilevel drive [J]. IEEE Trans. Power Electron., 2012, 27(20):974-984.
Zhang J J, Zhang T, Zheng Q, et al. Radiant efficiency and thermal analysis of high-power LEDs at linear and PWM dimming modes [J]. J. Optoelectron.Laser (光电子激光), 2013, 24(1):50-55 (in Chinese).
Cui D S, Guo W L, Cui B F, et al. Effects of injection current on optical characteristics of GaN-based power LED [J]. J. Optoelectron.Laser (光电子激光), 2011, 22(9):1309-1312 (in Chinese).
Zhong W J, Wei A X, Zhao Y. Dependence of GaN-based white LED colorimetric parameters on junction temperature [J]. Chin. J. Lumin.(发光学报), 2013, 34(9):1203-1207 (in Chinese).
Wang J C, Fang C H, Wu Y F, et al. The effect of junction temperature on the optoelectrical properties of InGaN/GaN multiple quantum well light-emitting diodes [J]. J. Lumin., 2012, 132(2):429-433.
Xu Y Q, Li B Q, Zhao W, et al. Influence of thermal effect on white LED photoelectric properties [J]. Mater. Res. Appl.(材料研究与应用), 2014, 8(4):245-250 (in Chinese).
Hu C Q, Zhang F H, Zhang J. The spectral and junction temperature properties of new white light LED [J]. Chin. J. Lumin.(发光学报), 2012, 33(9):939-943 (in Chinese).
Chen T, Chen Z Z, Lin L, et al. Methods for determining junction temperature of GaN-based white LEDs [J]. Chin. J. Lumin.(发光学报), 2006, 27(3):407-412 (in Chinese).
Liu L M, Zheng X D. Measurements of LEDs spectral characteristics and junction temperature [J]. Chin. J. Lumin.(发光学报), 2009, 30(5):1069-1073 (in Chinese).
0
浏览量
51
下载量
2
CSCD
关联资源
相关文章
相关作者
相关机构