1. 国防科技大学 脉冲功率激光技术国家重点实验室, 安徽 合肥 230037
扫 描 看 全 文
王玺, 李志明, 谢运涛等. 紫外准分子激光损伤典型光学材料的特性分析[J]. 发光学报, 2018,39(5): 692-698
WANG Xi, LI Zhi-ming, XIE Yun-tao etc. Characteristics of Typical Optical Materials Damaged by Ultraviolet Excimer Laser[J]. Chinese Journal of Luminescence, 2018,39(5): 692-698
王玺, 李志明, 谢运涛等. 紫外准分子激光损伤典型光学材料的特性分析[J]. 发光学报, 2018,39(5): 692-698 DOI: 10.3788/fgxb20183905.0692.
WANG Xi, LI Zhi-ming, XIE Yun-tao etc. Characteristics of Typical Optical Materials Damaged by Ultraviolet Excimer Laser[J]. Chinese Journal of Luminescence, 2018,39(5): 692-698 DOI: 10.3788/fgxb20183905.0692.
根据已经建立的紫外准分子激光损伤典型光学材料的理论模型,研究了准分子激光对透明光学材料(石英玻璃)和非透明光学材料(K9玻璃)的损伤特性,并结合实验结果证实了理论模型的有效性。研究表明:在准分子激光对非透明光学材料辐照下,激光光斑半径越大,产生的热应力和温度越小;脉宽越小,产生的热应力越大;随着脉冲数的增加,温度和热应力都逐渐增大。值得注意的是,当重频增加至45 Hz以上时,熔融损伤阈值开始低于应力损伤阈值,这说明当重频增加到一定程度时,非透明光学材料将首先产生熔融损伤,而不再是应力损伤。在准分子激光对透明光学材料辐照下,杂质微粒的半径和掩埋深度对光学材料温度场分布有着重要影响。但当杂质半径和掩埋深度超过一定的数值时,杂质粒子的存在与表面温度并无联系。理论模型能够较好地解释石英玻璃前/后表面相同的初始损伤形貌特征。
According to the theoretical model of typical optical materials damaged by ultraviolet excimer laser, a numerical simulation was performed to calculate temperature and thermal stress fields using finite element method. The damage effects of excimer laser on transparent optical material (fused silica) and non transparent optical material (K9 glass) were investigated, and the validity of the theoretical model was confirmed by the experimental results. The simulation results indicate that the laser parameters exhibit a great effect on damage effect and damage threshold. It is worth noting that the melting damage threshold is lower than the stress damage threshold when the repetition rate increases to more than 45 Hz. The thermal damage of excimer laser to the strongly adsorbed impurities on the surface of fused silica is also analyzed. The theoretical analysis is in agreement with the same initial damage morphology of fused silica surface.
激光损伤紫外准分子激光典型光学材料
laser damageultraviolet excimer lasertypical optical material
JONES S C, BRAUNLICH P, CASPER R T, et al.. Recent progress on laser-induced modifications and intrinsic bulk damage of wide-gap optical materials[J]. Opt. Eng., 1989, 28(10):1039-1068.
MILLER P E, SURATWALA T I, WONG L L, et al.. The distribution of subsurface damage in fused silica[J]. SPIE, 2005, 5991:599101.
PAN Y X, WANG B, SHEN Z H, et al.. Effect of inclusion matrix model on temperature and thermal stress fields of K9-glass damaged by long-pulse laser[J]. Opt. Eng., 2013, 52(4):044302.
CARR C W, BUDE J D, DEMANGE P. Laser-supported solid-state absorption fronts in silica[J]. Phys. Rev. B, 2010, 82(18):184304.
STEVENS-KALCEFF M A, STESMANS A, WONG J. Defects induced in fused silica by high fluence ultraviolet laser pulses at 355 nm[J]. Appl. Phys. Lett., 2002, 80(5):758-760.
KUCHEYEV S O, DEMOS S G. Optical defects produced in fused silica during laser-induced breakdown[J]. Appl. Phys. Lett., 2003, 82(19):3230-3232.
田爱玲, 王会婷, 袁娟娟, 等. 抛光表面的亚表层损伤检测方法研究[J]. 光子学报, 2013, 42(2):214-218. TIAN A L, WANG H T, YUAN J J, et al.. A novel method for subsurface damage measurement of optical components[J]. Acta Photon. Sinica, 2013, 42(2):214-218. (in Chinese).
TSENG A A, CHEN Y T, CHAO C L, et al.. Recent developments on microablation of glass materials using excimer lasers[J]. Opt. Lasers Eng., 2007, 45(10):975-992.
黄进, 蒋晓东, 刘红婕, 等. 真空环境中紫外脉冲激光对熔石英抗损伤能力的影响[J]. 物理学报, 2010, 59(7):4677-4681. HUANG J, JIANG X D, LIU H J, et al.. Influence of ultraviolet pulse laser irradiation on fused silica anti-damage ability in high vacuum environment[J]. Acta Phys. Sinica, 2010, 59(7):4677-4681. (in Chinese)
欧阳升, 刘志超, 许乔. 熔石英表面加工引入金属微粒的三倍频激光损伤机制[J]. 强激光与粒子束, 2011, 23(9):2423-2427. OUYANG S, LIU Z C, XU Q. Mechanism of third-harmonic laser-induced damage on fused silica surface with processing-introduced metal absorbers[J]. High Power Laser Part. Beams, 2011, 23(9):2423-2427. (in Chinese)
LIU H J, HUANG J, WANG F R, et al.. Subsurface defects of fused silica optics and laser induced damage at 351 nm[J]. Opt. Express, 2013, 21(10):12204-12217.
PALMIER S, LUC RULLIER J, CAPOULADE J, et al.. Effect of laser irradiation on silica substrate contaminated by aluminum particles[J]. Appl. Opt., 2008, 47(8):1164-1170.
NEAUPORT J, LAMAIGNERE L, BERCEGOL H, et al.. Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm[J]. Opt. Express, 2005, 13(25):10163-10171.
WANG X, SHAO J Z, LI H, et al.. Analysis of damage threshold of K9 glass irradiated by 248-nm KrF excimer laser[J]. Opt. Eng., 2016, 55(2):027102-1-7.
王玺, 方晓东. 准分子激光辐照K9玻璃的热力效应分析[J]. 强激光与粒子束, 2016, 28(4):041002-1-6. WANG X, FANG X D. Thermal and mechanical damage in K9 glass irradiated by KrF excimer laser[J]. High Power Laser Part. Beams, 2016, 28(4):041002-1-6. (in Chinese)
王玺. 准分子激光损伤K9玻璃和熔石英的理论与实验研究[D]. 合肥:中国科学技术大学, 2016. WANG X. Theoretical and Experimental Studies on Damage of K9 Glass and Fused Silica Irradiated by Excimer Laser[D]. Hefei:University of Science and Technology of China, 2016. (in Chinese)
0
浏览量
21
下载量
2
CSCD
关联资源
相关文章
相关作者
相关机构