Nakamura S, Mukai T, Senoh M. Candela-class high-brightness InGaN/AlGaN double-heterostructure blue-light-emitting [J]. Appl. Phys. Lett., 1994, 64 (13):1687-1689.[2] Jia D, Wang Y, Guo X, et al. Synthesis and characterization of YAG ∶ Ce LED nanophosphors [J]. J. Electrochem. Soc., 2007, 154 (1):J1-J4.[3] Haranath D, Chander H, Sharma P, et al. Enhanced luminescence of Y3Al5O12 ∶ Ce3+ nanophosphor for white light-emitting diodes [J]. Appl. Phys. Lett., 2006, 89 (17):31181-31183.[4] Hakuta Y, Haganuma T, Sue K, et al. Continuous production of phosphor YAG ∶ Tb nanoparticles by hydrothermal synthesis in supercritical water [J]. Mater. Res. Bull., 2003, 38 (7):1257-1265.[5] Yuan F, Ryu H. Ce-doped YAG phosphor powders prepared by co-precipitation and heterogeneous precipitation [J]. Mater. Sci. Eng. B, 2004, 107 (1):14-18.[6] Lee H J, Hong S K, Jung D S, et al. Y3Al5O12 ∶ Tb phosphor particles prepared by spray pyrolysis from spray solution with polymeric precursors and ammonium fluoride flux [J]. Mater. Lett., 2005, 59 (19-20):2383-2387.[7] Kang Y C, Lenggoro I W, Park S B, et al. YAG ∶ Ce phosphor particles prepared by ultrasonic spray pyrolysis [J]. Mater. Res. Bull., 2000, 35 (5):789-798.[8] Kang Y C, Roh H S, Park S B. Preparation of Y2O3 ∶ Eu phosphor particles of filled morphology at high precursor concentrations by spray pyrolysis [J]. Adv. Mater., 2000, 12 (6):451-453.[9] Kang Y C, Lenggoro L W, Park S B, et al. Photoluminescence characteristics of YAG ∶ Tb phosphor particles with spherical morphology and non-aggregation [J]. J. Phys. Chem. Solids, 1999, 60 :1855-1858.[10] Qi Faxin, Wang Haibo, Zhu Xianzhong. Spherical YAG ∶ Ce3+ phosphor particles prepared by spray pyrolysis [J]. J. Chin. Rare Earth Soc. (中国稀土学报), 2005, 23 (5):568-571 (in Chinese).[11] Li Xueming, Li Wulin, Kong Lingfeng, et al. Synthesis of YAG ∶ Ce phosphor by two-step spray pyrolysis and its characterization [J]. J. Chin. Rare Earth Soc. (中国稀土学报), 2007, 25 (4):406-411 (in Chinese).[12] Zhou Yonghui, Lin Jun, Yu Min, et al. Progress in luminescent materials prepared by spray pyrolysis process [J]. Chin. J. Lumin. (发光学报), 2002, 23 (5):503-509 (in Chinese).[13] Wen Lei, Sun Xudong, Ma Weimin. Fabrication of transparent YAG ceramics by a solid-state reaction method [J]. J. Chin. Ceram. Soc. (硅酸盐学报), 2003, 31 (9):819-822 (in Chinese).[14] Master K. Spray Drying Handbook [M]. London: George Godwin, 1985.[15] Lange F F. Sinterability of agglomerated powders [J]. J. Am. Ceram. Soc., 1983, 67 (2):83-89.[16] Zeng R J, Rand B. Improvement of true green porosity, sinterability and microstructure [J]. J. Mater. Sci. Technol., 2005, 21 (1):105-108.[17] Reuge N, Caussat B, Joffin N, et al. Modeling of spray pyrolysis-why are the synthesized Y2O3 microparticles hollow [J]. AIChE J., 2008, 54 (2):394-405.[18] Lenggoro I W, Hata T, Iskandar F, et al. An experimental and modeling investigation of particle production by spray pyrolysis using a laminar flow aerosol reactor [J]. J. Mater. Res., 2000, 15 (3):733-743.[19] Rattes A L R, Oliveira W P. Spray drying conditions and encapsulating composition effects on formation and properties of sodium diclofenac microparticles [J]. Powder Technol., 2007, 171 (1):7-14.[20] Kingery W D, Bowen H K, Uhlmann D R. Introduction to Ceramics [M]. New York: John Wiley and Sons, 1976.[21] Shaw D J. Colloid and Surface Chemistry [M]. Cornwall: Butterworth-Heinemann, 1992.[22] Abell J, Harris I, Cockayne B, et al. An investigation of phase stability in the Y2O3-Al2O3 system [J]. J. Mater. Sci. Lett., 1974, 9 (4):527-537.[23] Carniglia S C, Barna G L. Handbook of Industrial Refractories Technology: Principles, Types, Properties, and Applications [M]. New York: William Andrew, 1992.