NIU Ping-juan, XUE Wei-fang, NING Ping-fan etc. Fabrication Technology of LED Remote Fluorescent Sheets Based on Electrostatic Spinning Process[J]. Chinese Journal of Luminescence, 2016,37(5): 567-572
NIU Ping-juan, XUE Wei-fang, NING Ping-fan etc. Fabrication Technology of LED Remote Fluorescent Sheets Based on Electrostatic Spinning Process[J]. Chinese Journal of Luminescence, 2016,37(5): 567-572 DOI: 10.3788/fgxb20163705.0567.
Fabrication Technology of LED Remote Fluorescent Sheets Based on Electrostatic Spinning Process
不需要考虑复杂工艺的影响;使用红色荧光片可以在保持高光效的同时将球泡灯的相关色温由5595 K降低为3214 K
这在曲面发光及色温调节方面为灯具设计提供了广阔的空间。
Abstract
A new method of preparing the LED remote fluorescent sheet based on the electrostatic spinning process with flexible PET substrate is proposed
and the free package device structure is realized by separating the blue chip and the phosphor layer. Electrostatic spinning process is a new technology to prepare fluorescent sheet with high performance
which can effectively solve the problem of uneven distribution of fluorescent powder. The yellow and red fluorescent sheets were prepared by electrostatic spinning process. The transmittance
absorption rate
PL spectra of yellow fluorescent sheet were studied. The effect of red fluorescent sheet on the optical performance parameters of white LED
including the luminous flux
correlated color temperature and luminous efficiency
was also studied. Experimental results show that the prepared yellow fluorescent sheets have good light transmission in the visible band. Fluorescent spectrum is completely determined by the fluorescent powder
so we do not need to consider the influence of complex processes. Using red fluorescent sheet can keep high efficiency and decrease the correlated color temperature of the bulbs from 5595 K to 3214 K at the same time
which provides more chance for the design of lamps and lanterns in luminescence of curved surface and regulation of color temperature. With the continuous improvement of the technology
the remote fluorescent technology based on the electrostatic spinning process will be more perfect
the performance of the product will be further improved
and the pace of the white LED going into the lighting field is promoted.
关键词
Keywords
references
KIM J K, LUO H, SCHUBERT E F, et al.. Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup[J]. Jpn. J. Appl. Phys., 2005, 44(21):L649-L651.
周青超,柏泽龙,鲁路,等. 白光LED远程荧光粉技术研究进展与展望[J]. 中国光学, 2015, 8(3):313-328. ZHOU Q C, BO Z L, LU L, et al.. Research progress and prospect of remote fluorescent powder for white light LED[J].Chin. Opt., 2015, 8(3):313-328. (in Chinese)
DANIEL A, JEROME C B, DAVE C, et al.. Illumination with solid state lighting technology[J]. IEEE J. Select. Top. Quant. Electron., 2002, 8(2):310-320.
李亮,金尚忠,岑松原,等. 荧光粉浓度和电流强度对白光LED特性的影响[J]. 激光与光电子学进展, 2012, 49(3):032301-1-6. LI L, JIN S Z, CEN S Y, et al.. Influence of phosphor concentration and current intensity on phosphor-based white led characteristics[J]. Laser Optoelectron. Prog., 2012, 49(3):032301-1-6. (in Chinese)
印琰,杨宝东,朱月华,等. 白光LED用荧光粉的发展现状[J]. 中国照明电器, 2009, 3:6-10. YIN Y, YANG B D, ZHU Y H, et al.. The development actuality of phosphor for white LEDs[J]. China Light & Lighting, 2009, 3:6-10. (in Chinese)
陈钟文,袁波,陈小平,等. LED集成封装的研究现状[J]. 照明工程学报, 2013, 24(3):77-80. CHEN Z W, YUAN B, CHEN X P, et al.. Research status of LED integrated package[J]. China Illumin. Eng. J., 2013, 24(3):77-80. (in Chinese)
田俊,杨峻,王海波. 大功率LED热管散热器研究[J]. 照明工程学报, 2013, 24(2):44-48. TIAN J, YANG J, WANG H B. Study of high power LED heat pipe radiator[J]. China Illumin. Eng. J., 2013, 24(2):44-48. (in Chinese)
晏建宇,王双喜,刘高山,等. 大功率LED散热技术研究进展[J]. 照明工程学报, 2013, 24(5):84-89. YAN J Y, WANG S X, LIU G S, et al.. Research progress of high power LED heat dissipation technology[J]. China Illumin. Eng. J., 2013, 24(5):84-89. (in Chinese)
KANG D Y, WU E B, WANG D M. Modeling white light-emitting diodes with phosphor layers[J]. Appl. Phys. Lett., 2006, 89(23):231102-1-3.
PARK S C, RHEE I, KIM J Y, et al.. Luminous efficiency of open remote phosphor-converted white light-emitting diodes[J]. J. Korean Phys. Soc., 2012, 60(7):1191-1195.
XIAO H, LU Y J, SHIH T M, et al.. Improvements on remote diffuser-phosphor-packaged light-emitting diodes systems[J]. Photon. J. IEEE, 2014, 6(2):1-8.
LIN M T, YING S P, LIN M Y, et al.. Ring remote phosphor structure for phosphor-converted white LEDs[J]. Photonics Technology Letters, IEEE, 2010, 22(8):574-576.
THERON S A, YARIN A L, ZUSSMAN E, et al.. Multiple jets electrostatic spinning experiment and modeling[J]. Polymer, 2005, 46(9):2889-2899.
KIN G H, CHO Y, KIN W D. Stability analysis formulti-jets electrostatic spinning process modified with a cylindrical electrode[J]. Eur. Polym. J., 2006, 42(9):2031-2038.
THOMPSON C J, CHASE G G, YARIN A L. Effects of parameters on nanometer fiber diameter determined from electrostatic spinning model[J]. Polymer, 2007, 48(23):6913-6922.
YU J, QIU Y, ZHA X, et al.. Production of aligned helical polymer nanometer fibers by electrostatic spinning[J]. Eur. Polym. J., 2008, 44(9):2838-2844.
伏振兴,刘碧蕊. La1-xYO3:xPr3+荧光粉的溶液燃烧法合成及发光特性[J]. 光子学报, 2015, 44(8):0816003-1-4. FU Z X, LIU B R. Synthesis by solution combustion method and luminescence properties of La1-xYO3:xPr3+ phosphor[J]. Acta Photon. Sinica, 2015, 44(8):0816003-1-4. (in Chinese)