浏览全部资源
扫码关注微信
中国科学院苏州生物医学工程技术研究所 半导体光电子技术研究室,江苏 苏州,215163
Received:12 December 2014,
Revised:14 March 2015,
Published Online:02 April 2015,
Published:03 May 2015
移动端阅览
江先锋, 张丽芳, 郭栓银等. 高温硬焊料准连续半导体激光器巴条叠阵的性能研究[J]. 发光学报, 2015,36(5): 563-566
JIANG Xian-feng, ZHANG Li-fang, GUO Shuan-yin etc. Research on Performance of High Temperature Hard Solder Diode Laser Array[J]. Chinese Journal of Luminescence, 2015,36(5): 563-566
江先锋, 张丽芳, 郭栓银等. 高温硬焊料准连续半导体激光器巴条叠阵的性能研究[J]. 发光学报, 2015,36(5): 563-566 DOI: 10.3788/fgxb20153605.0563.
JIANG Xian-feng, ZHANG Li-fang, GUO Shuan-yin etc. Research on Performance of High Temperature Hard Solder Diode Laser Array[J]. Chinese Journal of Luminescence, 2015,36(5): 563-566 DOI: 10.3788/fgxb20153605.0563.
以巴条叠阵结构及封装方法为基础
研制了一组高温硬焊料准连续半导体激光器巴条叠阵
并研究了其相关的光电性能和寿命特征。结果表明
所研制的器件在200 A的工作电流下
重复频率250 Hz、脉宽200 s时
单巴峰值功率
>
200 W
50%光谱宽度
<
3 nm
电光转换效率
>
50%
寿命达到4.7110
9
shots时的功率衰减
<
15%;当工作电流为150 A时
预期寿命高达1.510
10
shots。
Based on the stack array of structure and assembly methods
a set of high temperature and hard solder quasi-continuous laser diode stack arrays were developed
and the related photo-electric performance and lifetime characteristics were studied. When the stack array is in condition of operating current 200 A
repetition frequency 250 Hz
pulse width 200 s
the FWHM is less than 3 nm
electro-optical conversion efficiency is more than 50%
peak power per bar is more than 200 W
lifetime is up to 4.7110
9
shots
and the peak power degradation is less than 15%. When the operating current is 150 A
the lifetime is up to 1.510
10
shots.
Feeler R, Junghans J, Remley J, et al. Reliability of high-power QCW arrays [J]. SPIE, 2010, 7583:758304-1-10.
Feeler R, Junghans J, Levy J, et al. QCW diode array reliability at 80x and 88x nm [J]. SPIE, 2011, 7918:791808-1-9.
Huang H, Wang J, DeVito M, et al. High-power high-brightness 808 nm QCW laser diode mini bars [J].SPIE, 2010, 7583:75831A-1-11.
Endriz J G, Chan J, Wolak E L, et al. Solder and material designs to improve resistance to cycling fatigue in laser diode stacks:US,6424667B1[P].2002-7-23.
Hoden B P. Method for modular laser diode assembly:US,6352873B1[P].2002-3-5.
Feeler R, Junghans J, Stephens E. High-power QCW arrays for operation over wide temperature extremes [J]. SPIE, 2009, 7198:71981F-1-9.
Meadows B L, Amzajerdian F, Baker N R, et al. Thermal characteristics of high-power, long-pulse width, quasi-CW laser diode arrays [J]. SPIE, 2004, 5336:203-211.
Lu G G, Huang Y, Lei Z F. Studies of the degradation mechanisms in high power diode lasers[C]//2011 International Symposium on Advanced Packaging Materials (APM), Xiamen:IEEE, 2011:80-84.
Lei Z F, Yang S H, Huang Y. Reliability and lifetime assessment of high-power diode laser [J]. J. Appl. Opt.(应用光学), 2008, 29(1):90-95 (in Chinese).
Reddy K V, Prasad J J B. Electromigration in indium thin films [J]. J. Appl. Phys., 1984, 55:1546-1550.
Van Gurp G J, De Waard P J, Du Chatenier F J. Thermomigration in indium and indium alloy films [J]. J. Appl. Phys., 1985, 58:728-735.
Liu X S, Davis R W, Hughes L C, et al. A study on the reliability of indium solder die bonding of high power semiconductor lasers [J]. J. Appl. Phys., 2006, 100(1):103104-1-6.
0
Views
290
下载量
4
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution