ZHANG Qing-mei, ZHU Da-qing,. Effect of Patterned Board Configuration on Luminous and Chromatic Performance for COB Packaged LED[J]. Chinese Journal of Luminescence, 2014,35(10): 1276-1282
ZHANG Qing-mei, ZHU Da-qing,. Effect of Patterned Board Configuration on Luminous and Chromatic Performance for COB Packaged LED[J]. Chinese Journal of Luminescence, 2014,35(10): 1276-1282 DOI: 10.3788/fgxb20143510.1276.
Effect of Patterned Board Configuration on Luminous and Chromatic Performance for COB Packaged LED
A patterned board configuration for light-emitting diode chip-on-board devices (LED COBs) with regular concave structures on it was presented. Optical models of LED chip and the phosphor were presented
and a Monte Carlo ray-tracing simulation procedure was used to simulate the light emission process. The inclination angle of the concave was the controlling parameter. The results show that the patterned board can not only improve the light extraction efficiency but also the angular color uniformity (ACU) of LED. When the inclination angles
=25
simulations show a maximum 66.2% and 73.6% light extraction efficiency improvement for this configuration compared with the conventional configuration
respectively. Without the pattern
the ACU of LED are 0.695 and 0.777 for planar board and for the board with reflecting cups
respectively. While with the pattern
the ACU are 0.799 and 0.814
respectively
when
=30.
关键词
Keywords
references
Yin Y, Yang B D, Zhu Y H, et al. The development actuality of phosphor for white LEDs[J]. China Light & Lighting (中国照明电器), 2009, 3:6-10 (in Chinese).
Ye S, Xiao F, Pan Y X, et al. Phosphors in phosphor-converted white light-emitting diodes: Recent advances in materials, techniques and properties[J]. Mater. Sci. Eng.: R, 2010, 71(1):1-34.
Lee Y J, Lee C J, Chen C H. Effect of surface texture and backside patterned reflector on the AlGaInP light-emitting diode: High extraction of waveguided light[J]. IEEE J. Quant. Elect., 2011, 47(5):636-641.
Li Z T, Wang Q H, Tang Y, et al. Light extraction improvement for LED COB devices by introducing a patterned leadframe substrate configuration[J]. IEEE Trans. Elect. Dev., 2013, 60(4):1397-1403.
Wu D, Wang K, Liu S. Enhancement of light extraction efficiency of multi-chips light-emitting diode array packaging with various microstructure arrays[C]//Electronic Components and Technology Conference (ECTC), IEEE, 2011:242-245.
Sommer C, Hartmann P, Pachler P, et al. A detailed study on the requirements for angular homogeneity of phosphor converted high power white LED light sources[J]. Opt. Mater., 2009, 31(6):837-848.
Sommer C, Wenzl F P, Hartmann P, et al. Tailoring of the color conversion elements in phosphor-converted high-power LEDs by optical simulations[J]. IEEE Photon. Technol. Lett., 2008, 20(9):739-741.
Liu Z Y, Wang K, Luo X, et al. Precise optical modeling of blue light-emitting diodes by Monte Carlo ray-tracing[J]. Opt. Express, 2010, 18(9):9398-9412.
Shuai Y, He Y, Tran N T, et al. Angular CCT uniformity of phosphor converted white LEDs: Effects of phosphor materials and packaging structures[J]. IEEE Photon. Technol. Lett., 2011, 23(3):137-139.
Wang K, Wu D, Chen F, et al. Angular color uniformity enhancement of white light-emitting diodes integrated with freeform lenses[J]. Opt. Lett., 2010, 35(11):1860-1862.
Liu Z Y, Liu S, Wang K, et al. Optical analysis of phosphor's location for high-power light-emitting diodes[J]. IEEE Trans. Dev. Mater. Reliab., 2009, 9(1):65-73.
Zhuo N Z, Zhang Y, Zhao B Z, et al. First optical design and optimization of LED integrated package[J]. Opto-Electron. Eng.(光电工程), 2013, 40(3):129-134 (in Chinese).
Liu Z Y, Liu S, Senior M, et al. Studies on optical consistency of white LEDs affected by phosphor thickness and concentration using optical simulation[J]. IEEE Trans. Compon. Pack. Technol., 2010, 33(4):680-687.