ZHANG Gang, TIAN Xiao-cui, GAO Yong-hui, CHANG Xi, WANG Jin, JIANG Wen-long, ZHANG Xi-yan. High Efficiency and Luminance White OLED Based on Fluorescence Dopant[J]. Chinese Journal of Luminescence, 2013,34(12): 1603-1606
ZHANG Gang, TIAN Xiao-cui, GAO Yong-hui, CHANG Xi, WANG Jin, JIANG Wen-long, ZHANG Xi-yan. High Efficiency and Luminance White OLED Based on Fluorescence Dopant[J]. Chinese Journal of Luminescence, 2013,34(12): 1603-1606 DOI: 10.3788/fgxb20133412.1603.
High Efficiency and Luminance White OLED Based on Fluorescence Dopant
The OLED devices were fabricated with the structure of ITO/NPB (30 nm)/Rubrene (0.2 nm)/CBP:Bczvbi (8 nm
x
%)/Bphen (30 nm)/Cs
2
CO
3
:Ag
2
O (2 nm
20%)/Al (100 nm). The effect of different CBP:Bczvbi doping concentration (
x
=5
10
15) on the properties of white light device was studied. High luminance and efficiency white organic light-emitting diodes (OLEDs) were obtained comprehensively utilizing the energy transfer between the host and the guset in the luminous layer and the hole-blocking characteristics. The device had the maximum efficiency and luminance when the mass fraction of Bczvbi was 10%. This device had a maximum current efficiency of 4.61 cd/A at 7 V and maximum luminance of 21 240 cd/m
2
at 9 V. The CIE coordinates of the device were well within the white region when the voltage changed from 4 V to 9 V.
关键词
Keywords
references
Sepeai S, Salleh M M, Yahaya M, et al. Improvement of white organic light emitting diode performances by an annealing process[J]. Thin Solid Films, 2009, 517(16):4679-4683.[2] Zhang J, Zhang F H, Yan H G. High efficiency white fluorescent organic light-emitting diodes with HAT-CN hole injection layer[J]. Chin. J. Liq. Cryst. Disp.(液晶与显示), 2011, 26(4):490-495 (in Chinese).[3] Hou L T, Wang P, Wang B, et al. High efficiency tandem organic light-emitting diodes with effective charge generation layer[J]. Chin. J. Liq. Cryst. Disp.(液晶与显示), 2011, 26(2):142-146 (in Chinese).[4] Sasabe H, Takamatsu J I, Motoyama T, et al. High-performance white OLEDs with high color-rendering index for next-generation solid-state lighting[J]. Adv. Mater., 2010, 22:5003-5007.[5] Blochwitz-Nimoth J, Langguth O, Murano S, et al. PIN-OLEDs for active-matrix-display use[J]. J. Soc. Inf. Disp., 2010, 18(8):596-605.[6] Komoda T, Ide N, Varutt K, et al. High-performance white OLEDs with high color-rendering index for next-generation solid-state lighting[J]. J. Soc. Inf. Disp., 2011, 19(11):838-846.[7] Yang H S, Wu L S, Pan Y Z. White organic light-emitting device based on phosphorescent emissive layer combined with fluorescent emitter[J]. J. OptoelectronicsLaser (光电子激光), 2013, 24(4):673-678 (in Chinese).[8] Ma Y, Han W, Zhang F H, et al. White organic light-emitting diodes based on mixed doping emitting layer[J]. Chin. J. Liq. Cryst. Disp.(液晶与显示), 2011, 26(1):40-43 (in Chinese).[9] Zhang Y H, Wu Y Z, Ma J J, et al. Ideal white organic electroluminescent device realized by inserting an ultra thin layer[J]. Chin. J. Lumin.(发光学报), 2013, 34(6):748-752 (in Chinese).[10] Li L, Yu J S, Wang J, et al. Higll-efficiency white phosphorescent organic light-emitting diodes[J]. Acta Phys.-Chim. Sinica (物理化学学报), 2007, 23(10):1493-1497 (in Chinese).[11] Zhou L, Deng R P, Hao Z M, et al. Efficient white electroluminescent device with stable emission spectrum[J]. Acta Chim. Sinica (化学学报), 2012, 70(18):1904-1908 (in Chinese).[12] Ding G Y, Jiang W L, Wang J, et al. White organic light-emitting devices based on a novel CzHQZn[J]. J. OptoelectronicsLaser (光电子激光), 2009, 20(6):717-780 (in Chinese).[13] Jiang W L, Ding G Y, Wang J, et al. White light devices fabricated by using DPVBi hole block and luminous characters[J]. Semicond. Optoelectron.(半导体光电), 2006, 27(6):701-703 (in Chinese).