Tang C W, VanSlyke S A. Organic electroluminescent diodes [J]. Appl. Phys. Lett., 1987, 51(12):913-915.[2] Haskal E I, Curioni A, Seidler P F, et al. Lithium-aluminum contacts for organic light-emitting devices [J]. Appl. Phys. Lett., 1997, 71(9):1151-1153.[3] Li F, Tang H, Anderegg J, et al. Fabrication and electroluminescence of double-layered organic light-emitting diodes with the Al2O3/Al cathode [J]. Appl. Phys. Lett., 1997, 70(10):1233-1235.[4] Mei YOKOYAMA, Wu Chungming, Su Shuihsiang. Enhancing the efficiency of white organic light-emitting diode using energy recyclable photovoltaic cells [J]. Chin. J. Lumin. (发光学报), 2012, 33(1):1-6 (in English).[5] Kido J, Matsumoto T. Bright organic electroluminescent devices having a metal-doped electron-injecting layer [J]. Appl. Phys. Lett., 1998, 73(20):2866-2868.[6] Lee J H, Wu M H, Chao C C, et al. High efficiency and long lifetime OLED based on a metal-doped electron transport layer [J]. Chem. Phys. Lett., 2005, 416(4-6):234-237.[7] Park Y, Choong V, Ettedgui E, et al. Energy level bending and alignment at the interface between Ca and a phenylene vinylene oligomer [J]. Appl. Phys. Lett., 1996, 69(8):1080-1082.[8] Kawakami S, Kitagawa M, Kusano H, et al. Dependence of electroluminescent properties on cathode metalsin PVCz double-layered organic EL devices [J]. Thin Solid Films, 2000, 363(1-2):17-20.[9] Hung L S, Tang C W, Mason M G. Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode [J]. Appl. Phys. Lett., 1997, 70(2):152-154.[10] Kang S J, Park D S, Kim S Y, et al. Enhancing the electroluminescent properties of organic light-emitting devices using a thin NaCl layer [J]. Appl. Phys. Lett., 2002, 81(14):2581-2583.[11] Schmitz C, Schmidt H W, Thelakkat M. Lithium-quinolate complexes as emitter and interface materials in organic light-emitting diodes [J]. Chem. Mater., 2000, 12(10):3012-3019.[12] Zhan Y Q, Xiong Z H, Shi H Z, et al. Sodium stearate, an effective amphiphilic molecule buffer material between organic and metal layers in organic light-emitting devices [J]. Appl. Phys. Lett., 2003, 83(8):1656-1658.[13] Kang, H S, Park K N, Cho Y R, et al. Enhanced performance of organic electroluminescence diodes with a 2-TNATA:C60 hole injection layer [J]. J. Ind. Eng. Chem., 2009, 15(5):752-757.[14] Park K N, Kang H S, Senthlikumar N, et al. Enhanced efficiency of organic electroluminescence diode using PEDOT-PSS/NPD-C60 hole injection/transport layers [J]. Polymer-Korea, 2009, 33(5):407-412.[15] Yun C H, Cho H, Kang H. Electron injection via pentacene thin films for efficient inverted organic light-emitting diodes [J]. Appl. Phys. Lett., 2009, 95(5):053301-1-3.[16] Xie K, Qiao J, Duan L, et al. Organic cesium salt as an efficient electron injection material for organic light-emitting diodes [J]. Appl. Phys. Lett., 2008, 93(18):183302-1-3.[17] Wu C I, Lin C T, Chen Y H, et al. Electronic structures and electron-injection mechanisms of cesium-carbonate-incorporated cathode structures for organic light-emitting devices [J]. Appl. Phys. Lett., 2006, 88(15):152104-1-3.[18] Gassmann A, Melzer C, Seggen H V, et al. The Li3PO4/Al bilayer: An efficient cathode for organic light emitting devices [J]. J. Appl. Phys., 2009, 105(12):083513-1-6.[19] Li Y, Zhang D Q, Duan L, et al. Elucidation of the electron injection mechanism of evaporated cesium carbonate cathode interlayer for organic light-emitting diodes [J]. Appl. Phys. Lett., 2007, 90(1):012119-1-3.[20] Choudhury K R, Yoon J H, So F. LiF as an n-dopant in tris(8-hydroxyquinoline) aluminum thin films [J]. Adv. Mater., 2008, 20(8):1456-1461.[21] Lee D H, Park J H, Chae H, et al. Enhanced carrier balance by organic salt doping in single-layer polymer light-emitting devices [J]. Organic Electronics, 2009, 10(7):1345-1351